3724 Cumberland St Nw, Washington, Dc 20016
ALTERATION AND REPAIR permit in Washington DC, issued June 24, 2026. Permit #B2606388.
PERMIT ISSUED
STATUS
June 24, 2026
ISSUED
Permit details
| Permit number | B2606388 |
| Address | 3724 Cumberland St Nw, Washington, Dc 20016, 20016 |
| Permit type | ALTERATION AND REPAIR — CONSTRUCTION |
| Work description | Shingle Roof Installation:1. Remove existing slate roof, underlayments and flashings and haul from premises. 2. Inspect conditions of existing wood decking. Any board sheathing that needs to be replaced will be replaced at an additional rate of $6.50/linear foot. If the wood decking is plywood, any plywood that needs to be replaced will be replaced at an additional cost of $95.00/sheet.3. Install one course of ice and water shield at the eaves, valleys, around all pipe jacks, and other penetrations.4. Install Diamond Deck synthetic felt over remainder of the roof.5. Install aluminum drip edge at all eaves and rakes.6. Install Swift Start shingle starter at eaves and rakes, CertainTeed Landmark fiberglass shingles (architectural shingles), Shingle vent II ridge vents at the ridges, hip and ridge shingles, and aluminum neoprene ring pipe collars at the pipe jacks.7. Clean and dispose of all job-related debris and haul from the premises.Exclusion:We recommend keeping the slate on the vertical walls near window by southeastern section (see photos below option 1). For price to replace that section with shingles, see Option #1.Option #1: 1. Replace slate on vertical wall with CertainTeed Landmark Shingles. We will install 6 nails per shingle following the steep slope application. Option #2:1. Install copper flashings and copper drip edge on shingle roof.Aluminum Gutter Installation:1. Remove existing gutters and downspouts and haul from premises.2. Inspect conditions of existing fascia. Any fascia that needs to be replaced, can be done at a rate of $12.00/linear foot.3. Furnish and install 6.032 ogee aluminum gutter with hidden hangers and a 3 x 4 downspout at existing locations. Color to be selected by homeowner.4. We will install round downspouts by front entrance to match style of existing downspouts.5. Clean and dispose of all job-related debris and haul from the premises.6. NOTE: It may be necessary to change the adapter in the underground drains to accommodate larger sized downspouts.Copper Gutter Installation:1. Scope to install new copper gutters and downspouts at existing locations.2. We will install 4 round downspouts at the gutters of the front portico and 3 x 4 downspouts at the other locations, matching the current existing styles.Gutter Guard Installation:1. Install EZ Lock Gutter Guards on newly installed gutters.Copper Roof Replacement: (Standing Seam): 1. Remove existing copper roof panels, underlayments and flashings and haul from premises. 2. Install one course ice and water shield on the entirety of the deck.3. Install rosin underlayment.4. Properly integrate copper flashing at the terminations.5. Furnish and install 16-ounce standing seam copper panels. Flat Pan Copper Replacements:1. Replace the copper by the dormer window and vertical walls and install 16-ounce flat seam copper. Amount Accept: Initial Decline: InitialShingle Roof Installation $18,644.00 Option #1 ADD $850.00 Option #2 ADD $3,892.00 Aluminum Gutter Installation $7,449.00 Copper Gutter Installation $16,816.00 Gutter Guard Installation $1,673.00 Copper Roof Replacement $8,140.00 Flat Pan Copper Replacement $6.630.00 TOTAL This proposal/contract is subject to the Terms & Conditions outlined below. Theproposal is limited to 30 days acceptance from the date above. Date Accepted 20 By: Homeowner Jacks Roofing CompanyBy: Dean Jagusch, CEOShingle Roof Installation:1. Remove existing slate roof, underlayments and flashings and haul from premises. 2. Inspect conditions of existing wood decking. Any board sheathing that needs to be replaced will be replaced at an additional rate of $6.50/linear foot. If the wood decking is plywood, any plywood that needs to be replaced will be replaced at an additional cost of $95.00/sheet.3. Install one course of ice and water shield |
| Applicant | MELODY LYNN |
Recent permits nearby (ZIP 20016)
Watching this neighborhood?
Get an email within minutes when a new Washington DC permit matches your trade, ZIP codes, or valuation range. Free to start.
Set up a free alert →